You are viewing revision #5 of this wiki article.
This version may not be up to date with the latest version.
You may want to view the differences to the latest version or see the changes made in this revision.
- Make your RPI3 device ready to deploy Yii2 by following 6 Steps
- Deploy your Yii2 app to the device by following 5 Steps
Note:Pantahub is the only place where Linux firmware can be shared and deployed for any device, You can signup @pantahub here:http://www.pantahub.com
Make your RPI3 device ready to deploy Yii2 by following 6 Steps ¶
Step 1: Burn the RPI3 initial stable image into your sd card. ¶
a) Download RPI3 image ¶
b) unxz the device image ¶
$ unxz rpi3_initial_stable.img.xz
c) Burn image into sd card using Raspberry Pi Imager 1.2 ¶
Step 2: Boot your RPI3 ¶
a) Insert your sd card and supply the power ¶
Step 3: Singup @pantahub here http://www.pantahub.com ¶
Step 4: Download & Install a CLI tool "pvr" ¶
Note: pvr is a CLI tool which can be used to interact with your device through pantahub platform. Note: Using pvr you can share your firmware and projects as simple as with a git tree:
pvr clone; pvr commit; pvr post
$ go get gitlab.com/pantacor/pvr $ go build -o ~/bin/pvr gitlab.com/pantacor/pvr
Note: You need "GOLANG" to be installed in your system for building pvr from source code.
Step 5: Detect & Claim your device ¶
a) Connect a LAN cable between your RPI3 & computer/Router. ¶
b) Open your terminal & run
$ pvr scan ¶
c) Claim your device ¶
$ pvr claim -c merely-regular-gorilla https://api.pantahub.com:443/devices/5f1b9c44e193a5000afa9901
d) Log into Panthub.com and check whether the newly claimed device appeared in the dashboard or not. ¶
Step 6: Clone the device to your computer using the Clone URL of your device ¶
$ pvr clone https://pvr.pantahub.com/sirinibin/presently_learning_pelican/0 presently_learning_pelican
Now your device is ready to deploy your Yii2 app
Deploy your Yii2 app to the device by following 5 Steps ¶
Step 1: Move to device root dir ¶
`$ cd presently_learning_pelican`
Step 2: Add a new app "yii2" into the device ¶
sirinibin/yii2-basic-arm32v7:latest is a Docker image made for the devices with ARM32 architecture
>> You can customise the docker image for your custom Yii2 app.
$ pvr app add yii2 --from=sirinibin/yii2-basic-arm32v7:latest
Step 3: Deploy the changes to the device ¶
$ pvr add .
$ pvr commit
$ pvr post
Step 4: Check the device status changes in Pantahub.com dashboard & wait for the status to become "DONE" ¶
Status 1: Status 2: Status 3: !(https://i.imgur.com/cmz5jqU.png ) Status 4:
Step 5: Verify the "yii2" app deployment ¶
Access the device IP: http://10.42.0.231/myapp1/web/ in your web browser.
You are done!